Adjustable Solar Mounting System

Production process of hot-dip galvanized ground screw

  • 2021-11-18 10:29:14

Our ground screw products introduce foreign patented technology, the spiral body is directly formed by steel plate, and the pile body will not destroy the original strength of the soil when it is driven into the ground, because the special spiral shape not only has a strong drawing force but also has the same bearing capacity!

Hot-dip galvanized ground screw are also called hot-dip galvanized bolts.Thick outer diameter spiral piles are generally cut, deformed, welded, pickled, hot-dipped and other processes to produce qualified piles.


The long bolt pile is cut according to the length required by the customer.


After cutting, the tail of the bolt pile becomes sharp by the machine, which is convenient for driving into the ground.


After being deformed, the bolt will be welded. The blade and flange of the bolt are welded.

The bolts are degreasing and derusting to show a non-polluting and infiltrating surface. They are immediately immersed in a plating tank where the zinc is melted beforehand. The method of forming a layer of zinc coating on the surface of the workpiece. The advantage of hot-dip galvanizing lies in its strong anti-corrosion ability, and good adhesion and hardness of the galvanized layer.

The processing level of the spiral pile directly determines the service life of the ground screw anchors.

© Copyright: 2021 Xiamen Wintop New Energy Tech Co., Ltd.. All Rights Reserved.

IPv6 network supported

IPv6 network supported


Leave A Message

Leave A Message

    If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

  • #
  • #
  • #