One Horizontal Single-axis Solar Tracker System

Single-axis Solar Tracker System it means that the tracker tracks the sun from east to west, rotates on a point, moves synchronously, and moves according to the panel row or partly.

Product Origin:
China
Color:
Nature, or can be customized
Shipping Port:
Xiamen
Brand:
Wintop
Model:
WTT-1P

Product Detail

One Portrait Horizontal Single-axis Solar Tracker System

Product Description

Wintop one portrait horizontal single-axis solar tracker system only has a single row of solar panels.This tracker system have intelligent AI algorithm to improve power generation, compared with the fixed bracket, the power generation increase is about 10%-15%.

Technical Parameters

PV-Modules
PV- Modules supported	Fully ﬁt for 210 module
Structure
System type	One portrait horizontal single-axis tracker
Maximum capacity per row	54kWp (Estimated with 600W PV-Modules)
PV- Module quantity per row	90 PCS (1x90)
Tracking Range	±60°（Customized according to project）
Tracking accuracy	±1°
Motor quantity	1 motor per row
Structural Materials	HDG Steel, Al- Mg-Zn Coating Steel
Foundation	Concrete foundation, Steel pile, PHC pile
Quantity of foundation/MW	205 PCS/ MW (Estimated with 600W PV-Modules)
Electrical
Solar tracking method	Astronomical algorithm + closed- loop control (AI)
Control system	MCU
Signal transmission	Wire (RS485) or wireless (Zigbee)
Drive method	Slew Drive
Motor Type	24V DC Motor
Power supply	AC- powered or self- powered
Backtracking	Yes
Manual operation	Yes
Protection function
Wind protection	≥18m/s
Night stow mode	Yes
Overheat prevention	Yes
Overheat prevention	Yes
System fault self-diagnosis	Yes
Rotate to horizontal time	4-5min
Environment
Wind load	Customized according to local condition
Operating temperature	-30℃ ~ +60℃
Operating temperature	C5
Slope tolerance	North-south 10%~20%, East-west no limits
Other
Special tools	Not required
Load design standard	GB, ASCE, BS EN,AS (according to project)

Electrical Principle

Single-axis Tracker System electric principle

Features & Benefits

Fully ﬁt for 210 module
Intelligent AI algorithm to improve power generation
Adaption to various terrains allowing a north-south slope up to 10% to 20%
Easy installation and easy maintenance
Stable and reliable operation
Power generation increasement of 15-30%

Main Structure components

Single-axis Tracker System components

CPP Wind Tunnel Test

Wintop established a partnership with CPP, the first American company to provide wind engineering services to architects and engineers. Combining the frequency and characteristics of damping ratio of the WT-tracker tracking system, study the resonance, flutter, gallop, torsional divergence and other results of theWT-tracker systemcaused by aerodynamics, and analyze the influence and instability during the operation of the system.

Single-axis Tracker System cpp test

Wintop Multi-drive Solar Tracker Advantages:

System Damping Ratio is greater
Reduce Amplitude on Modules by 50%
Reduce the Force on Torque Tube by 50%
Reduce the Force on Driving Pillar by 50%
Reduce Torsion Angle on Torque Tube by 50%
Optimize Wind Resistance System

Traditional Single-drive Tracking System

Single-axis Tracker System single-drive

WTT Multi-drive Tracking System

Operating Mode

Terrain Adaption

WT-Tracker System

Flexible Layout
Fully Use Irregular Land, Improve Land Utilization

Single-axis Tracker System terrain adaption

20% N-S Slope
Unlimited E-W Slope

Foundation Options

Type of

Foundation

Steel Piles

Concrete with

Steel Piles

Poured

Concrete Pile

PHC Piles

Application

Soft Ground

Gravel

Ground

Agriculture PV

Complementary

Fishery PV

Complementary

Connection

Method

Direct

Ramming

Ramming+Conc

rete

Anchor Bolt

Connection

Pile-Top Welding

Single-axis Tracker System foundation

Modules Array Proposals

Project

Single-axis Tracker System case

Hot Tags :

Horizontal Single Axis Solar Tracker Single Axis Solar Tracker Solar Panel Tracking System Single Axis Solar Tracker Project Single Axis Solar Tracker Controller

Leave A Message

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Subject : One Horizontal Single-axis Solar Tracker System

Categories

New Products

Related Products

Multi Drive Double-Sided Single Axis Tracker System

The solar panel tracker mount system is a system that optimizes the use of sunlight during the process of solar thermal and photovoltaic power generation to improve the efficiency of photoelectric conversion.

Two-Sided Horizontal Single-axis Solar Tracker System

The use of solar tracking systems can significantly improve the power generation efficiency of solar photovoltaic modules.

Automatic One Axis Easy Installation Dual Solar Tracker

Double portrait horizontal single-axis solar tracker is easy to install and maintain.

Intelligent Single Post Dual Row Solar Tracking System

The single post solar tracking system is fully compatible with 210 silicon wafer modules.

Automatic Single Pile Solar Tracker with 10 PV Panels

Wintop single post solar tracking system is fully fit 210 module.

Large Horizontal Single Axis Solar Tracker Arduino

Wintop solar single-axis multi-drive tracker can increase the maximum power generation by 30%.

Small single axis solar panel tracker mount System

Wintop single axis solar tracking system solutions can be used on all terrains.

Diy Single Axis Solar Tracker System With Double Row Panel

Double row panel single-axis solar tracker is easy to install and maintain.