• June 14. 2022

Now people see a lot of solar products when they buy all kinds of electrical products. Choosing such a product can not only contribute to environmental protection, but also save more usage costs for users. We all know that ordinary electrical products only need power supply to work, solar brackets and solar electrical products do not need power supply, and solar brackets only need to use solar ene...

• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• July 04. 2022

Unlike crystalline silicon, perovskites are made up of a family of materials named after the mineral from which they are made, which in turn is named after Lev Perovski. Perovskites have great potential in the solar industry for the fabrication of perovskite solar cells, making them the most promising among third-generation photovoltaic cells. In just 5 years, the efficiency of perovskite solar ce...

• July 14. 2022

With more and more people installing solar power these days, solar panels are the most critical part of any solar system installation. So how to choose solar panels is what we need to consider, mainly through the following factors. 1. Solar panel efficiency Solar panel efficiency refers to the ratio (expressed as a percentage) of the solar energy hitting the surface of the panel to the electrical ...

• July 19. 2022

The roof is usually the most practical place to place solar panels. They get a lot of direct sunlight, there's usually nothing to block them, and they're sturdy. When the panels are connected, huge bolts hold them in place. This creates a roof mount of solar panels. Let's take a look at what types of solar roof mounting systems are available. Solar roof mounting systems can be divided into two cat...

• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 12. 2022

1. Product Introduction Wintop Agricultural Greenhouse Solar PV Ground Mounting System is mainly applied to the installation of agricultural solar PV farms, achieving the dual-use of lands. According to the varied solar module arrays, the light exposure requirement of plant and the dimension of farming machines, Wintop will design a suitable solar mounting system solution with highly pre-assembled...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 02. 2022

You will only see these solar panels when they are installed on the roof. But underneath the panel there is a structure that holds the solar panels in place. This structure is called a solar shelf or solar mount. Therefore, solar mounts are an important part of every solar system, connecting the solar panel system to the roof or ground. In simple terms solar racking systems or solar panel mount ar...