• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• June 30. 2022

The invention of solar panels has made a huge progress in renewable energy, more and more people are installing solar panels, but the maintenance of solar panels is also a huge problem. The power generation efficiency of the solar panel is affected by the dust and the like collected on the solar panel. If the module is not cleaned for a month, the power output will be reduced by 50%. Cleaning dirt...

• July 04. 2022

Unlike crystalline silicon, perovskites are made up of a family of materials named after the mineral from which they are made, which in turn is named after Lev Perovski. Perovskites have great potential in the solar industry for the fabrication of perovskite solar cells, making them the most promising among third-generation photovoltaic cells. In just 5 years, the efficiency of perovskite solar ce...

• July 14. 2022

With more and more people installing solar power these days, solar panels are the most critical part of any solar system installation. So how to choose solar panels is what we need to consider, mainly through the following factors. 1. Solar panel efficiency Solar panel efficiency refers to the ratio (expressed as a percentage) of the solar energy hitting the surface of the panel to the electrical ...

• July 19. 2022

The roof is usually the most practical place to place solar panels. They get a lot of direct sunlight, there's usually nothing to block them, and they're sturdy. When the panels are connected, huge bolts hold them in place. This creates a roof mount of solar panels. Let's take a look at what types of solar roof mounting systems are available. Solar roof mounting systems can be divided into two cat...

• August 12. 2022

1. Product Introduction Wintop Agricultural Greenhouse Solar PV Ground Mounting System is mainly applied to the installation of agricultural solar PV farms, achieving the dual-use of lands. According to the varied solar module arrays, the light exposure requirement of plant and the dimension of farming machines, Wintop will design a suitable solar mounting system solution with highly pre-assembled...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 02. 2022

You will only see these solar panels when they are installed on the roof. But underneath the panel there is a structure that holds the solar panels in place. This structure is called a solar shelf or solar mount. Therefore, solar mounts are an important part of every solar system, connecting the solar panel system to the roof or ground. In simple terms solar racking systems or solar panel mount ar...

• September 21. 2022

A solar carport is a covered parking area with a canopy made of photovoltaic panels. Sometimes these carports are designed for a single parking space - such as in a residential driveway. Other times, they may be strung together to cover an entire commercial parking lot. A solar carport is essentially a higher ground mounted solar panel system. They are simply lifted high enough so that the vehicle...