• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 12. 2022

1. Product Introduction Wintop Agricultural Greenhouse Solar PV Ground Mounting System is mainly applied to the installation of agricultural solar PV farms, achieving the dual-use of lands. According to the varied solar module arrays, the light exposure requirement of plant and the dimension of farming machines, Wintop will design a suitable solar mounting system solution with highly pre-assembled...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 16. 2022

The orientation of the solar panel is very important. Solar panels receive the most energy when the sun's rays hit the panel surface vertically. Making sure your solar panels are oriented in the right direction and have the proper slope will help ensure they produce the most energy when exposed to the highest intensity of sunlight for the longest period of time. In the Northern Hemisphere, the gen...

• September 28. 2022

The photovoltaic off-grid power generation system is generally composed of a photovoltaic array composed of solar cell components, a solar controller, an inverter, a battery bank, and a load. The photovoltaic array converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar controller, inverter (or inverter integrated machine), and char...

• October 20. 2022

The photovoltaic cleaning robot is simple and convenient to use. Let's learn about its usage guide below. 1.Supported usage scenarios The tilt of the photovoltaic array is less than 20° (dry brushing) or 15° (water washing). The lowest point of the photovoltaic array is suspended more than 10cm. There are no obstacles within 50cm of the edge of the photovoltaic array. (If there are obstacles only ...

• March 15. 2023

Wintop roof solar mounting system is developed to fit all types of L feets in solar roof mounting projects. Fasteners are uniquely designed to more easier and quicker installation with the use of simple tools. Our company is fully based on the Australian AS/NZS1170.2 standard in the design of the product structure. When installing on roof, you must obey the local safety standards, and pay attentio...

• April 04. 2023

Metal roofs are considered the best medium for photovoltaic systems because metal roofs are specially designed and prefabricated to meet the needs of the building's climate and location, and the warranty period is usually as long as 40 years or so. And the average lifespan of solar panels is typically around 20 to 25 years, so metal roofs don't have to worry about the risk of needing to replace th...

• April 14. 2023

Adoption of solar energy has become easier and more common across the globe. The International Energy Agency predicts that global solar PV capacity will nearly triple between 2022 and 2027, making it the world's largest source of electricity generation. Inflation Reduction Act Despite the enormous benefits of solar power, implementation is not always seamless. Sometimes developers can foresee comm...