• June 24. 2022

The technical route of photovoltaic modules mainly includes three types: polycrystalline silicon, monocrystalline silicon and thin film. All technologies have advantages and disadvantages. Under the same conditions, the efficiency of a photovoltaic solar system is only related to the nominal power of the module, not directly related to the efficiency of the module. The component technology is matu...

• July 04. 2022

Unlike crystalline silicon, perovskites are made up of a family of materials named after the mineral from which they are made, which in turn is named after Lev Perovski. Perovskites have great potential in the solar industry for the fabrication of perovskite solar cells, making them the most promising among third-generation photovoltaic cells. In just 5 years, the efficiency of perovskite solar ce...

• July 28. 2022

Thin-film solar panels are the second generation of solar panels, which are made by depositing one or more layers of photovoltaic photon absorbing materials on substrates such as glass, plastic or metal. Thin-film cells are very thin, typically ranging in thickness from a few nanometers to tens of microns, which makes thin-film solar cells both flexible and lightweight. Because of their high flexi...

• August 12. 2022

1. Product Introduction Wintop Agricultural Greenhouse Solar PV Ground Mounting System is mainly applied to the installation of agricultural solar PV farms, achieving the dual-use of lands. According to the varied solar module arrays, the light exposure requirement of plant and the dimension of farming machines, Wintop will design a suitable solar mounting system solution with highly pre-assembled...

• August 24. 2022

An international research team has developed a cubic luminescent solar concentrator (LSC) photovoltaic device that can be assembled into a mosaic configuration for applications in urban environments. The best performing device achieved a power conversion efficiency of 11.6%. A Dutch-Australian research team has developed a 1 cm3 luminescent solar concentrator (LSC) device equipped with 20% efficie...

• September 21. 2022

A solar carport is a covered parking area with a canopy made of photovoltaic panels. Sometimes these carports are designed for a single parking space - such as in a residential driveway. Other times, they may be strung together to cover an entire commercial parking lot. A solar carport is essentially a higher ground mounted solar panel system. They are simply lifted high enough so that the vehicle...

• September 28. 2022

The photovoltaic off-grid power generation system is generally composed of a photovoltaic array composed of solar cell components, a solar controller, an inverter, a battery bank, and a load. The photovoltaic array converts solar energy into electric energy under the condition of light, and supplies power to the load through the solar controller, inverter (or inverter integrated machine), and char...

• October 20. 2022

The photovoltaic cleaning robot is simple and convenient to use. Let's learn about its usage guide below. 1.Supported usage scenarios The tilt of the photovoltaic array is less than 20° (dry brushing) or 15° (water washing). The lowest point of the photovoltaic array is suspended more than 10cm. There are no obstacles within 50cm of the edge of the photovoltaic array. (If there are obstacles only ...

• November 16. 2022

Ground screws, also known as ground anchors, are an easy and environmentally friendly alternative to concrete foundations. Screws into the ground without digging before installation. More and more people are using ground screws instead of concrete foundations. So what are the advantages of grounding screws compared to concrete? 1.The ground screw has different lengths to choose from, and the depth...